Ive taken this down, will reformat into powerpoint to match the other one.

Its here ---------->   https://1stcavdiv.forumotion.net/t1086-how-to-use-diss-15-doppler-navigation-set-in-the-mi-8mtv2#8917

regards

Strut

here is the 5 step check list you wanted.  First is my version, second is the official out of the manual one.  

DISS-15 Doppler Navigation Set

1. Turn ON the DOPPLER switch on the right
triangular panel.

2. Set LATERAL DEV counter:  Rest to 000 KM

3. Set DISTANCE counter in KM:  Set 000 to count distance traveled, or set desired distance as a negative, in order to count down to detestation.

4. Set COURSE ANGLE counter:  Set to desired course.  Find course off the F10 MAP and minus 6°  for magnetic variation.

5. Press the ON button located on digital display unit face panel to initiate
digital readout.


Official US Army TM 1-1520-Mi-17-10 page 117
https://www.dropbox.com/s/2olbzs8whz8jxb0/MI-17%20-10%202007.pdf

Operation. To operate the Doppler system,
proceed as follows:

1. Turn ON the DOPPLER switch on the right
triangular panel.
2. Set the mode selector switch on the control panel
(PK) to the OPERATE position.

                   NOTE
To use the digital display unit, set the
LATERAL DEVIATION (KM) and
DISTANCE (KM) counters to zero and
the COURSE counter to the desired
course. Press the ON button located on
digital display unit face panel to initiate
digital readout.

Thanks Six